[D /FileType 'in2' /HelpFile 'Par30_11.hlp' /ScriptFile 'Intf_300.stx' /FileVersion 1 /ModuleInfo [D /FileName 'IntfTr1100DN_B1100_V3S22_b01' /BaseName 'IntfTr1100DN' /SubName 'B1100' /BetaInfo 'b01' /Version 3 /SubVersion 22 /TreeID 259 /TreeLevel 3 ] /InstanceInfoDict [D /Document_1 '\Interface\0185-1078*.pdf' /Document_2 '\Interface\0185-1072*.pdf' ] /Units [A [R [D:UnitRec /UnitName @0 /UUID @0 /MetricScale @0 /MetricOffset @0 /MetricCaption @0 /ImperialScale @0 /ImperialOffset @0 /ImperialCaption @0 /SIScale @0 /SIOffset @0 /SICaption @0 /BaseUnit @0 ] [A 'Integer' 0 1E0 0E0 '' 1E0 0E0 '' 1E0 0E0 '' 'base' ] ] [R @6 [A 'Percent' 1 1E0 0E0 '%' 1E0 0E0 '%' 0.01E0 0E0 '' 'base' ] ] [R @6 [A 'Freq_10kHz' 2 0.01E0 0E0 'MHz' 0.01E0 0E0 'MHz' 10000E0 0E0 'Hz' 'base' ] ] [R @6 [A 'Time_1ms' 3 0.001E0 0E0 's' 0.001E0 0E0 's' 0.001E0 0E0 's' 'base' ] ] [R @6 [A 'Time_100us' 4 0.1E0 0E0 'ms' 0.1E0 0E0 'ms' 0.0001E0 0E0 's' 'base' ] ] [R @6 [A 'Pos_100nm' 5 0.0001E0 0E0 'mm' 3.9370079E-6 0E0 'in' 1E-7 0E0 'm' 'base' ] ] [R @6 [A 'Vel_1um' 6 1E-6 0E0 'm/s' 3.9370079E-5 0E0 'in/s' 1E-6 0E0 'm/s' 'base' ] ] [R @6 [A 'Acc_10um' 7 1E-5 0E0 'm/s^2' 0.00039370079E0 0E0 'in/s^2' 1E-5 0E0 'm/s^2' 'base' ] ] [R @6 [A 'Weight_1g' 8 1E0 0E0 'g' 0.0022046226E0 0E0 'lbs' 0.001E0 0E0 'kg' 'base' ] ] [R @6 [A 'Force_1mN' 9 0.001E0 0E0 'N' 0.00022480894E0 0E0 'lbf' 0.001E0 0E0 'N' 'base' ] ] [R @6 [A 'Curr_1mA' 10 0.001E0 0E0 'A' 0.001E0 0E0 'A' 0.001E0 0E0 'A' 'base' ] ] [R @6 [A 'Voltage_10mV' 11 0.01E0 0E0 'V' 0.01E0 0E0 'V' 0.01E0 0E0 'V' 'base' ] ] [R @6 [A 'Voltage_5mV' 12 0.004882813E0 0E0 'V' 0.004882813E0 0E0 'V' 0.004882813E0 0E0 'V' 'base' ] ] [R @6 [A 'Voltage_200mV' 13 0.1953125E0 0E0 'V' 0.1953125E0 0E0 'V' 0.1953125E0 0E0 'V' 'base' ] ] [R @6 [A 'Voltage_50mV' 14 0.0537109375E0 0E0 'V' 0.0537109375E0 0E0 'V' 0.0537109375E0 0E0 'V' 'base' ] ] [R @6 [A 'Res_10mOhm' 15 0.01E0 0E0 'Ohm' 0.01E0 0E0 'Ohm' 0.01E0 0E0 'Ohm' 'base' ] ] [R @6 [A 'Ind_100uH' 16 0.1E0 0E0 'mH' 0.1E0 0E0 'mH' 0.0001E0 0E0 'H' 'base' ] ] [R @6 [A 'ViscFrict_10mN' 17 0.01E0 0E0 'N/(m/s)' 5.71015E-5 0E0 'lbf/(in/s)' 0.01E0 0E0 'N/(m/s)' 'base' ] ] [R @6 [A 'PID_P' 18 0.1E0 0E0 'A/mm' 0.1E0 0E0 'A/mm' 100E0 0E0 'A/m' 'base' ] ] [R @6 [A 'PID_D' 19 0.1E0 0E0 'A/(m/s)' 0.1E0 0E0 'A/(m/s)' 0.1E0 0E0 'A/(m/s)' 'base' ] ] [R @6 [A 'PID_I' 20 0.1E0 0E0 'A/(mm*s)' 0.1E0 0E0 'A/(mm*s)' 100E0 0E0 'A/(m*s)' 'base' ] ] [R @6 [A 'OrientAngle_1deg' 21 1E0 0E0 'deg' 1E0 0E0 'deg' 0.01745329E0 0E0 'rad' 'base' ] ] [R @6 [A 'FFSpring_1A' 22 1E0 0E0 'A/m' 1E0 0E0 'A/m' 1E0 0E0 'A/m' 'base' ] ] [R @6 [A 'FFDamping_10mA' 23 0.01E0 0E0 'A/(m/s)' 0.01E0 0E0 'A/(m/s)' 0.01E0 0E0 'A/(m/s)' 'base' ] ] [R @6 [A 'FFAccel_1mA' 24 0.001E0 0E0 'A/(m/s^2)' 0.001E0 0E0 'A/(m/s^2)' 0.001E0 0E0 'A/(m/s^2)' 'base' ] ] [R @6 [A 'BEMF_10mV' 25 0.01E0 0E0 'V/(m/s)' 0.01E0 0E0 'V/(m/s)' 0.01E0 0E0 'V/(m/s)' 'base' ] ] [R @6 [A 'Time_10us' 26 0.01E0 0E0 'ms' 0.01E0 0E0 'ms' 1E-5 0E0 's' 'base' ] ] [R @6 [A 'Increments' 27 1E0 0E0 'Incr' 1E0 0E0 'Incr' 1E0 0E0 'Incr' 'base' ] ] [R @6 [A 'EncoderSpeed' 28 0.001E0 0E0 'Incr/s' 0.001E0 0E0 'Incr/s' 0.001E0 0E0 'Incr/s' 'base' ] ] [R @6 [A 'Jerk_100um' 29 0.0001E0 0E0 'm/s^3' 0.0039370079E0 0E0 'in/s^3' 0.0001E0 0E0 'm/s^3' 'base' ] ] [R @6 [A 'ForceConst_10mN' 30 0.01E0 0E0 'N/A' 0.01E0 0E0 'N/A' 0.01E0 0E0 'N/A' 'base' ] ] [R @6 [A 'Promille' 31 0.1E0 0E0 '%' 0.1E0 0E0 '%' 0.1E0 0E0 '%' 'base' ] ] [R @6 [A 'ppm10' 32 0.01E0 0E0 '%' 0.01E0 0E0 '%' 0.01E0 0E0 '%' 'base' ] ] [R @6 [A 'Time_1us' 33 1E0 0E0 'us' 1E0 0E0 'us' 1E-6 0E0 's' 'base' ] ] [R @6 [A 'Revolutions' 34 1E0 0E0 'Rev' 1E0 0E0 'Rev' 1E0 0E0 'Rev' 'base' ] ] [R @6 [A 'Freq_1kHz' 35 1E0 0E0 'kHz' 1E0 0E0 'kHz' 1000E0 0E0 'Hz' 'base' ] ] [R @6 [A 'Time_1hr' 36 1E0 0E0 'h' 1E0 0E0 'h' 1E0 0E0 'h' 'base' ] ] [R @6 [A 'SensorRes' 37 1.52587890625E-6 0E0 'um' 1.52587890625E-6 0E0 'um' 1.52587890625E-12 0E0 'm' 'base' ] ] [R @6 [A 'Length_1mm' 38 0.001E0 0E0 'm' 0.00328084E0 0E0 'ft' 0.001E0 0E0 'm' 'base' ] ] [R @6 [A 'Resistivity_Ohm/m' 39 0.001E0 0E0 'Ohm/m' 0.001E0 0E0 'Ohm/m' 0.001E0 0E0 'Ohm/m' 'base' ] ] [R @6 [A 'ViscFriction_100mN/m/s' 40 0.1E0 0E0 'N/(m/s)' 0.1E0 0E0 'N/(m/s)' 0.1E0 0E0 'N/(m/s)' 'base' ] ] [R @6 [A 'TorqueConstant_100uNm/A' 41 0.0001E0 0E0 'Nm/A' 0.0001E0 0E0 'Nm/A' 0.0001E0 0E0 'Nm/A' 'base' ] ] [R @6 [A 'BEMF_1uVeff/rpm' 42 1E-6 0E0 'Veff/rpm' 1E-6 0E0 'Veff/rpm' 1E-6 0E0 'Veff/rpm' 'base' ] ] [R @6 [A 'Time_1ns' 43 1E-6 0E0 'ms' 1E-6 0E0 'ms' 1E-9 0E0 's' 'base' ] ] [R @6 [A 'Force_100mN' 44 0.1E0 0E0 'N' 0.1E0 0E0 'N' 0.1E0 0E0 'N' 'base' ] ] [R @6 [A 'F_Ctrl_P' 45 0.0001E0 0E0 'A/N' 0.0001E0 0E0 'A/N' 0.0001E0 0E0 'A/N' 'base' ] ] [R @6 [A 'F_Ctrl_I' 46 0.1E0 0E0 'A/(N*s)' 0.1E0 0E0 'A/(N*s)' 0.1E0 0E0 'A/(N*s)' 'base' ] ] [R @6 [A 'F_Ctrl_I_10m' 47 0.01E0 0E0 'A/(N*s)' 0.01E0 0E0 'A/(N*s)' 0.01E0 0E0 'A/(N*s)' 'base' ] ] [R @6 [A 'Pos_10nm' 48 1E-5 0E0 'mm' 3.9370079E-6 0E0 'in' 1E-8 0E0 'm' 'base' ] ] [R @6 [A 'Vel_100nm' 49 1E-7 0E0 'm/s' 3.9370079E-5 0E0 'in/s' 1E-7 0E0 'm/s' 'base' ] ] [R @6 [A 'Jrk_1mm' 50 0.001E0 0E0 'm/s^3' 0.00039370079E0 0E0 'in/s^3' 0.001E0 0E0 'm/s^3' 'base' ] ] [R @6 [A 'kBaud' 51 1E0 0E0 'kBaud' 1E0 0E0 'kBaud' 1E0 0E0 'kBaud' 'base' ] ] [R @6 [A 'Voltage_1mV' 52 0.001E0 0E0 'V' 0.001E0 0E0 'V' 0.001E0 0E0 'V' 'base' ] ] [R @6 [A 'Voltage_5V12B' 53 0.001323974609375E0 0E0 'V' 0.001323974609375E0 0E0 'V' 0.001323974609375E0 0E0 'V' 'base' ] ] [R @6 [A 'Curr_33mA' 54 0.033099365E0 0E0 'A' 0.033099365E0 0E0 'A' 0.033099365E0 0E0 'A' 'base' ] ] [R @6 [A 'Time_100ns' 55 0.1E0 0E0 'us' 0.1E0 0E0 'us' 1E-7 0E0 's' 'base' ] ] [R @6 [A 'IntMilli' 56 0.001E0 0E0 '' 0.001E0 0E0 '' 0.001E0 0E0 '' 'base' ] ] [R @6 [A 'IntCenti' 57 0.01E0 0E0 '' 0.01E0 0E0 '' 0.01E0 0E0 '' 'base' ] ] [R @6 [A 'IntDeci' 58 0.1E0 0E0 '' 0.1E0 0E0 '' 0.1E0 0E0 '' 'base' ] ] [R @6 [A 'E1200PwrVol' 59 0.0539794921875E0 0E0 'V' 0.0539794921875E0 0E0 'V' 0.0539794921875E0 0E0 'V' 'base' ] ] [R @6 [A 'E1200_0_10V' 60 0.0027027027E0 0E0 'V' 0.0027027027E0 0E0 'V' 0.0027027027E0 0E0 'V' 'base' ] ] [R @6 [A 'E1200_10Vpp' 61 0.00537056928E0 0E0 'V' 0.00537056928E0 0E0 'V' 0.00537056928E0 0E0 'V' 'base' ] ] [R @6 [A 'Time_1ms_ms' 62 1E0 0E0 'ms' 1E0 0E0 'ms' 0.001E0 0E0 'ms' 'base' ] ] [R @6 [A 'Time_100us_us' 63 100E0 0E0 'us' 100E0 0E0 'us' 0.0001E0 0E0 'us' 'base' ] ] [R @6 [A 'Time_1ns_ns' 64 1E0 0E0 'ns' 1E0 0E0 'ns' 1E-9 0E0 's' 'base' ] ] [R @6 [A 'Temp' 65 1E0 0E0 '°C' 1E0 0E0 '°C' 1E0 0E0 '°C' 'base' ] ] [R @6 [A 'Time_1ms_us' 66 0.001E0 0E0 'ms' 0.001E0 0E0 'ms' 1E-6 0E0 's' 'base' ] ] [R @6 [A 'AD_EloTemp' 67 0.48828E0 -50E0 '°C' 0.48828E0 -50E0 '°C' 0.48828E0 -50E0 '°C' 'base' ] ] [R @6 [A 'Time_10ns_us' 68 0.01E0 0E0 'us' 0.01E0 0E0 'us' 1E-8 0E0 'us' 'base' ] ] [R @6 [A 'T_Cap_mJ_Deg' 69 0.001E0 0E0 'J/°C' 0.001E0 0E0 'J/°C' 0.001E0 0E0 'J/°C' 'base' ] ] [R @6 [A 'Temp_01Deg' 70 0.1E0 0E0 '°C' 0.1E0 0E0 '°C' 0.1E0 0E0 '°C' 'base' ] ] [R @6 [A 'Time_1s' 71 1E0 0E0 's' 1E0 0E0 's' 1E0 0E0 's' 'base' ] ] [R @6 [A 'Voltage_5_0V12B' 72 0.001220703125E0 0E0 'V' 0.001220703125E0 0E0 'V' 0.001220703125E0 0E0 'V' 'base' ] ] [R @6 [A 'Voltage_1mV_2' 73 0.001E0 0E0 'V^2' 0.001E0 0E0 'V^2' 0.001E0 0E0 'V^2' 'base' ] ] [R @6 [A 'Voltage_100uV' 74 0.0001E0 0E0 'V' 0.0001E0 0E0 'V' 0.0001E0 0E0 'V' 'base' ] ] [R @6 [A 'Force_1N/s' 75 1E0 0E0 'N/s' 1E0 0E0 'N/s' 1E0 0E0 'N/s' 'base' ] ] [R @6 [A 'Force_1mAs/N' 76 0.001E0 0E0 'mAs/N' 0.001E0 0E0 'mAs/N' 0.001E0 0E0 'mAs/N' 'base' ] ] [R @6 [A 'Voltage_10_0V12B' 77 0.00244140625E0 0E0 'V' 0.00244140625E0 0E0 'V' 0.00244140625E0 0E0 'V' 'base' ] ] ] /ParameterArray [A [R [D:Directory /UPID @0 /DEVICE_UPID @0 /Level @0 /Caption @0 /Permission @0 /AdditionalFunction @0 /AddrUsage @0 /UseVFlag @0 /WizardUPIDList @0 /HelpIndex @0 /HelpTextDict @0 ] [A 3276800 3276800 1 'DeviceNet Interface' 85 '' 0 'DN_Wizard' [A ] 0 [D /English 'Main directory for DeviceNet parameters.' /Deutsch 'Hauptverzeichnis der DeviceNet Parameter.' /Francais '' /Italiano '' ] ] ] [R [D:RadioDirBit /UPID @0 /DEVICE_UPID @0 /Level @0 /Caption @0 /Permission @0 /AdditionalFunction @0 /AddrUsage @0 /UseVFlag @0 /WizardUPIDList @0 /HelpIndex @0 /HelpTextDict @0 /SetVFlag @0 /DefValue @0 /DisplayMode @0 ] [A 8200 17440 2 'Dis-/Enable' 127 '' 13 'DN_Wizard' [A 8401 8402 8340 8341 8345 8342 8350 8351 8352 8353 8354 8355 8360 8356 8361 8357 8362 8400 8403 8320 8416 ] 0 [D /English 'With the Dis-/Enable parameter the LinMot drive can be run without the DeviceNet going online. IMPORTANT: To activate the DeviceNet Interface, the Dip-Switch @'Interface@' at the bottom of the drive has to be set to @'ON@' on E1100 drive series.' /Deutsch 'Auswahlparameter fuer das Aktiviere/Deaktivieren der DeviceNet Inetrface SW.' /Francais '' /Italiano '' ] [A ] 1 'SCALED' ] ] [R [D:RadioChildBit /UPID @0 /DEVICE_UPID @0 /Level @0 /Caption @0 /Permission @0 /AdditionalFunction @0 /AddrUsage @0 /UseVFlag @0 /WizardUPIDList @0 /HelpIndex @0 /HelpTextDict @0 /SetVFlag @0 /ChildValue @0 ] [A 3276816 3276816 3 'Disable' 127 '' 0 'DN_Wizard' [A ] 0 [D /English 'The drive runs without DeviceNet.' /Deutsch 'Deaktiveire die DeviceNet Inetrface SW.' /Francais '' /Italiano '' ] [A ] 0 ] ] [R @175 [A 3276817 3276817 3 'Enable' 127 '' 0 'DN_Wizard' [A ] 0 [D /English 'The drive runs only with a DeviceNet connection.' /Deutsch 'Aktiveire die DeviceNet Inetrface SW.' /Francais '' /Italiano '' ] [A 'DN_on' ] 1 ] ] [R @164 [A 3276864 3276864 2 'Polled IO Config' 127 '' 0 'DN_on' [A ] 0 [D /English 'These parameters define the mapping of the exchanged polled IO data. The configuration is split into the Command Configuration (the input to the drive). The polled IO timeout value normally is configured from the master with the expected package rate.' /Deutsch 'Definition der ausgetauschten IO dsaten im Polled Mode.' /Francais '' /Italiano '' ] ] ] [R @169 [A 8401 17441 3 'Force Parameter Poll Time Out' 60 '' 13 'DN_on' [A ] 0 [D /English 'With this parameter the parameter value of the polled IO time out could be forced. ' /Deutsch 'Auswahl, ob die Polled Timeout-Zeit ueber Parameter fixiert werden kann.' /Francais '' /Italiano '' ] [A ] 0 'SCALED' ] ] [R @175 [A 3276880 3276880 4 'Disabled' 60 '' 0 'DN_on' [A ] 0 [D /English 'Enable master configuration with expected package rate.' /Deutsch 'Polled Timeout-Zeit wird vom Master definiert.' /Francais '' /Italiano '' ] [A ] 0 ] ] [R @175 [A 3276881 3276881 4 'Enabled' 60 '' 0 'DN_on' [A ] 0 [D /English 'Force parameter time out value. (Disable master configuration of the time out value)' /Deutsch 'Polled Timeout-Zeit ist ueber parameterwert (UPID 20D0) fixiert.' /Francais '' /Italiano '' ] [A ] 1 ] ] [R @169 [A 8402 17442 3 'Allow Direct Poll Response' 60 '' 13 'DN_on' [A ] 0 [D /English 'If this Parameter is enabled, the polled IO connection is setup, as soon as the drive successfully connects to the CAN bus.' /Deutsch 'Ermoegliche Poll Response ohne Masterkonfiguration.' /Francais '' /Italiano '' ] [A ] 0 'SCALED' ] ] [R @175 [A 3276896 3276896 4 'Disabled' 60 '' 0 'DN_on' [A ] 0 [D /English 'Wait for master configuration of the Polled IO data exchange.' /Deutsch 'Poll Antwort muss vom Master konfiguriert werden.' /Francais '' /Italiano '' ] [A ] 0 ] ] [R @175 [A 3276897 3276897 4 'Enabled' 60 '' 0 'DN_on' [A ] 0 [D /English 'Setup Polled IO data exchange, as soon as connected to the DeviceNet.' /Deutsch 'Poll Antwort ohne Masterkonfiguration erlaubt.' /Francais '' /Italiano '' ] [A ] 1 ] ] [R @164 [A 3276912 3276912 3 'Command Config' 127 '' 0 'DN_on' [A ] 0 [D /English 'The command configuration determines the data that is sent from the PLC to LinMot drive. The length of the default configured command data is 20 bytes.' /Deutsch 'Definition der Polled Daten welche vom Master gesendet werden.' /Francais '' /Italiano '' ] ] ] [R [D:Bool /UPID @0 /DEVICE_UPID @0 /Level @0 /Caption @0 /Permission @0 /AdditionalFunction @0 /AddrUsage @0 /UseVFlag @0 /WizardUPIDList @0 /HelpIndex @0 /HelpTextDict @0 /SetVFlag @0 /DefValue @0 /DisplayMode @0 ] [A 8340 17408 4 'Control Word' 127 '' 13 'DN_on' [A ] 0 [D /English 'Control Word is sent from PLC. ' /Deutsch 'Master sendet Controlwort' /Francais '' /Italiano '' ] [A ] 1 'SCALED' ] ] [R @224 [A 8341 17409 4 'Motion Cmd Intf' 127 '' 13 'DN_on' [A ] 0 [D /English 'Motion Command Interface is sent from PLC.' /Deutsch 'Master sendet Motion Command Interface.' /Francais '' /Italiano '' ] [A ] 1 'SCALED' ] ] [R [D:RadioDir16 /UPID @0 /DEVICE_UPID @0 /Level @0 /Caption @0 /Permission @0 /AdditionalFunction @0 /AddrUsage @0 /UseVFlag @0 /WizardUPIDList @0 /HelpIndex @0 /HelpTextDict @0 /DefValue @0 /DisplayMode @0 ] [A 8345 25477 4 'Motion Cmd Intf Length' 127 '' 13 'DN_on' [A ] 0 [D /English 'Defines the length of the motion command interface sent from the PLC.' /Deutsch 'Defintion der Motion Command Interface Groesse.' /Francais '' /Italiano '' ] 9 'SCALED' ] ] [R [D:RadioChild /UPID @0 /DEVICE_UPID @0 /Level @0 /Caption @0 /Permission @0 /AdditionalFunction @0 /AddrUsage @0 /UseVFlag @0 /WizardUPIDList @0 /HelpIndex @0 /HelpTextDict @0 /SetVFlag @0 /ChildValue @0 ] [A 3276928 3276928 5 '3 Words' 127 '' 0 'DN_on' [A ] 0 [D /English 'Command size is 3 words.' /Deutsch 'Motion command Interface ist drei Worte lang (1 Wort Header 2 Worte Parameterlaenge).' /Francais '' /Italiano '' ] [A ] 3 ] ] [R @240 [A 3276930 3276930 5 '6 Words' 127 '' 0 'DN_on' [A ] 0 [D /English 'Command size is 6 words.' /Deutsch 'Motion command Interface ist sechs Worte lang (1 Wort Header 5 Worte Parameterlaenge).' /Francais '' /Italiano '' ] [A ] 6 ] ] [R @240 [A 3276929 3276929 5 '9 Words' 127 '' 0 'DN_on' [A ] 0 [D /English 'Command size is 9 words.' /Deutsch 'Motion command Interface ist neun Worte lang (1 Wort Header 8 Worte Parameterlaenge).' /Francais '' /Italiano '' ] [A ] 9 ] ] [R @224 [A 8342 17410 4 'RAM Parameter Channel' 127 '' 13 'DN_on' [A ] 0 [D /English 'The Ram parameter channel is sent from PLC.' /Deutsch 'Master sendet Parameter Kanal' /Francais '' /Italiano '' ] [A ] 0 'SCALED' ] ] [R @164 [A 3276944 3276944 3 'Response Config' 127 '' 0 'DN_on' [A ] 0 [D /English 'The response configuration determines the data that is responded from the LinMot drive to the PLC. The length of the default configured response data is 18 bytes. Each direct variable needs 4 bytes data space in the response telegram.' /Deutsch 'Definition der gepollten Daten, welche als Antwort vom Slave gesendet werden.' /Francais '' /Italiano '' ] ] ] [R @224 [A 8350 17424 4 'Status Word' 127 '' 13 'DN_on' [A ] 0 [D /English 'Send Status Word to PLC.' /Deutsch 'Slave sendet Status Wort.' /Francais '' /Italiano '' ] [A ] 1 'SCALED' ] ] [R @224 [A 8351 17425 4 'State Var' 127 '' 13 'DN_on' [A ] 0 [D /English 'Send State Var to PLC.' /Deutsch 'Slave Sendet State Var' /Francais '' /Italiano '' ] [A ] 1 'SCALED' ] ] [R @224 [A 8352 17426 4 'Error Code' 127 '' 13 'DN_on' [A ] 0 [D /English 'Send Error Code to PLC.' /Deutsch 'Slave sendet Error Code' /Francais '' /Italiano '' ] [A ] 0 'SCALED' ] ] [R @224 [A 8353 17427 4 'Warn Word' 127 '' 13 'DN_on' [A ] 0 [D /English 'Send Warn Word to PLC. ' /Deutsch 'Slave sendet Warn Word.' /Francais '' /Italiano '' ] [A ] 1 'SCALED' ] ] [R @224 [A 8354 17428 4 'Echo MC Intf Header' 127 '' 13 'DN_on' [A ] 0 [D /English 'Send back MC interface header.' /Deutsch 'Slave sendet Eche des Motion Command Haeders.' /Francais '' /Italiano '' ] [A ] 0 'SCALED' ] ] [R @224 [A 8355 17429 4 'Monitoring Channel 1' 127 '' 13 'DN_on' [A ] 0 [D /English 'Send monitoring channel 1.' /Deutsch 'Slave sendet Moitor Kanal 1 Daten (4Bytes)' /Francais '' /Italiano '' ] [A ] 1 'SCALED' ] ] [R [D:UInt16 /UPID @0 /DEVICE_UPID @0 /Level @0 /Caption @0 /Permission @0 /AdditionalFunction @0 /AddrUsage @0 /UseVFlag @0 /WizardUPIDList @0 /HelpIndex @0 /HelpTextDict @0 /UUID @0 /DisplayMode @0 /MinValue @0 /MaxValue @0 /DefValue @0 ] [A 8360 25478 4 'Channel 1 UPID' 127 'UPID' 13 'DN_on' [A ] 0 [D /English 'UPID for monitoring channel 1.' /Deutsch 'UPID Definition welche die daten des Monitor Kanals definiert.' /Francais '' /Italiano '' ] 0 'SCALED' 0 65535 62681 ] ] [R @224 [A 8356 17430 4 'Monitoring Channel 2' 127 '' 13 'DN_on' [A ] 0 [D /English 'Send monitoring channel 2.' /Deutsch 'Slave sendet Moitor Kanal 2 Daten (4Bytes)' /Francais '' /Italiano '' ] [A ] 1 'SCALED' ] ] [R @295 [A 8361 25479 4 'Channel 2 UPID' 127 'UPID' 13 'DN_on' [A ] 0 [D /English 'UPID for monitoring channel 2.' /Deutsch 'UPID Definition welche die daten des Monitor Kanals definiert.' /Francais '' /Italiano '' ] 0 'SCALED' 0 65535 59828 ] ] [R @224 [A 8357 17431 4 'Monitoring Channel 3' 127 '' 13 'DN_on' [A ] 0 [D /English 'Send monitoring channel 3.' /Deutsch 'Slave sendet Moitor Kanal 3 Daten (4Bytes)' /Francais '' /Italiano '' ] [A ] 1 'SCALED' ] ] [R @295 [A 8362 25480 4 'Channel 3 UPID' 127 'UPID' 13 'DN_on' [A ] 0 [D /English 'UPID for monitoring channel 3.' /Deutsch 'UPID Definition welche die daten des Monitor Kanals definiert.' /Francais '' /Italiano '' ] 0 'SCALED' 0 65535 62679 ] ] [R @295 [A 8400 25481 3 'Polled IO Timeout' 127 '' 13 'DN_on' [A ] 0 [D /English 'This parameter defines the polled data exchange timeout.' /Deutsch 'Paremeter Wert der Polled Timeout -Zeit.' /Francais '' /Italiano '' ] 4 'SCALED' 0 20000 1000 ] ] [R @295 [A 8403 25482 3 'Polled IO Timeout Add Value' 127 '' 13 'DN_on' [A ] 0 [D /English 'This parameter defines the time value which is added to the polled data exchange time for timeout calculation.' /Deutsch 'Parameter Zeitwert der der zur Data-zykluszeit addiert wird, fuer die Polled Timeout -Zeit Berechnung.' /Francais '' /Italiano '' ] 4 'SCALED' 0 20000 100 ] ] [R @169 [A 8320 17411 2 'Slave Config' 127 '' 13 'DN_on' [A ] 0 [D /English 'The LinMot drive offers a UCMM Grp 3 Service opened explicit message channel. And a Group 2 Master/Slave allocable explicit message channel. IMPORTANT: Turn on the UCMM behavior only if needed (second master to serve at the same time). Otherwise the Group 2 only server capabilities should be enough to serve the master at start up.' /Deutsch 'Konfiguration des Slaveverhaltens' /Francais '' /Italiano '' ] [A ] 1 'SCALED' ] ] [R @175 [A 3276819 3276819 3 'Force Group 2 Only Server' 127 '' 0 'DN_on' [A ] 0 [D /English 'Group 3 UCMM service is disabled.' /Deutsch 'Erzwinge Group 2 only Server Verhalten (einfachstes Slave Verhalten welches von allen Mastern unterstuetzt werden sollte)' /Francais '' /Italiano '' ] [A ] 1 ] ] [R @164 [A 3145952 3145952 2 'Error' 85 '' 0 'DN_on' [A ] 0 [D /English 'In this section the Error behavior could be defined.' /Deutsch 'Fehlverhalten Konfiguration.' /Francais '' /Italiano '' ] ] ] [R @164 [A 3145968 3145968 3 'Error Detection Mask' 85 '' 0 'DN_on' [A ] 0 [D /English 'With the error detection mask a single error could be disabled. Also a DeviceNet error causes the MC-SW go to the error state.' /Deutsch 'Maske fuer die Fehlergeneration im Zusammenhang mit DeviceNet.' /Francais '' /Italiano '' ] ] ] [R @224 [A 8416 17448 4 'Poll Timeout' 127 '' 13 'DN_on' [A ] 0 [D /English 'Poll Timeout error enable.' /Deutsch 'Generiere Fehler bei Poll Time Out Fahler.' /Francais '' /Italiano '' ] [A ] 1 'SCALED' ] ] ] /VariableArray [A [R @164 [A 3277056 3277056 1 'DeviceNet' 85 '' 4096 'DN_on' [A ] 0 [D /English 'Main directory for DeviceNet variables.' /Deutsch 'Hauptverzeichnis der DeviceNet Variablen.' /Francais '' /Italiano '' ] ] ] [R @295 [A 8500 26656 2 'MAC ID' 85 '' 4097 '' [A ] 0 [D /English 'MACID (drive bus number) on which the drive works.' /Deutsch 'DeviceNet MACID (Knotenummer)' /Francais '' /Italiano '' ] 0 'HEX' 0 65535 0 ] ] [R [D:EnumDir16 /UPID @0 /DEVICE_UPID @0 /Level @0 /Caption @0 /Permission @0 /AdditionalFunction @0 /AddrUsage @0 /UseVFlag @0 /WizardUPIDList @0 /HelpIndex @0 /HelpTextDict @0 /DefValue @0 /DisplayMode @0 ] [A 8501 26657 2 'DeviceNet Connection State' 85 '' 4097 '' [A ] 0 [D /English 'Connection state of the DeviceNet.' /Deutsch 'DeviceNet Verbindungszustand am CAN-Bus.' /Francais '' /Italiano '' ] 0 'SCALED' ] ] [R [D:EnumChild16 /UPID @0 /DEVICE_UPID @0 /Level @0 /Caption @0 /Permission @0 /AdditionalFunction @0 /AddrUsage @0 /UseVFlag @0 /WizardUPIDList @0 /HelpIndex @0 /HelpTextDict @0 /SetVFlag @0 /ChildValue @0 ] [A 3277072 3277072 3 'Non-existent' 85 '' 4097 '' [A ] 0 [D /English 'Connection state of the DeviceNet.' /Deutsch 'DeviceNet Verbindungszustand am CAN-Bus.' /Francais '' /Italiano '' ] [A ] 0 ] ] [R @363 [A 3277073 3277073 3 'Configuring' 85 '' 4097 '' [A ] 0 [D /English 'Connection state of the DeviceNet.' /Deutsch 'DeviceNet Verbindungszustand am CAN-Bus.' /Francais '' /Italiano '' ] [A ] 1 ] ] [R @363 [A 3277074 3277074 3 'Waiting For Connection ID' 85 '' 4097 '' [A ] 0 [D /English 'Connection state of the DeviceNet.' /Deutsch 'DeviceNet Verbindungszustand am CAN-Bus.' /Francais '' /Italiano '' ] [A ] 2 ] ] [R @363 [A 3277075 3277075 3 'Established' 85 '' 4097 '' [A ] 0 [D /English 'Connection state of the DeviceNet.' /Deutsch 'DeviceNet Verbindungszustand am CAN-Bus.' /Francais '' /Italiano '' ] [A ] 3 ] ] [R @363 [A 3277076 3277076 3 'Timed Out' 85 '' 4097 '' [A ] 0 [D /English 'Connection state of the DeviceNet.' /Deutsch 'DeviceNet Verbindungszustand am CAN-Bus.' /Francais '' /Italiano '' ] [A ] 4 ] ] [R @363 [A 3277077 3277077 3 'Deferred Delete' 85 '' 4097 '' [A ] 0 [D /English 'Connection state of the DeviceNet.' /Deutsch 'DeviceNet Verbindungszustand am CAN-Bus.' /Francais '' /Italiano '' ] [A ] 5 ] ] [R @358 [A 8502 26714 2 'Polled Connection State' 85 '' 4099 '' [A ] 0 [D /English 'Connection state of the Polled IO data Exchange.' /Deutsch 'Verbindingszustand der Polled IO Verbindung (diese wird vom Master aktiviert).' /Francais '' /Italiano '' ] 0 'SCALED' ] ] [R @363 [A 3277104 3277104 3 'Non-existent' 85 '' 4097 '' [A ] 0 [D /English 'Connection state of the Polled IO data Exchange.' /Deutsch 'Verbindingszustand der Polled IO Verbindung (diese wird vom Master aktiviert).' /Francais '' /Italiano '' ] [A ] 0 ] ] [R @363 [A 3277105 3277105 3 'Configuring' 85 '' 4097 '' [A ] 0 [D /English 'Connection state of the Polled IO data Exchange.' /Deutsch 'Verbindingszustand der Polled IO Verbindung (diese wird vom Master aktiviert).' /Francais '' /Italiano '' ] [A ] 1 ] ] [R @363 [A 3277106 3277106 3 'Waiting For Connection ID' 85 '' 4097 '' [A ] 0 [D /English 'Connection state of the Polled IO data Exchange.' /Deutsch 'Verbindingszustand der Polled IO Verbindung (diese wird vom Master aktiviert).' /Francais '' /Italiano '' ] [A ] 2 ] ] [R @363 [A 3277107 3277107 3 'Established' 85 '' 4097 '' [A ] 0 [D /English 'Connection state of the Polled IO data Exchange.' /Deutsch 'Verbindingszustand der Polled IO Verbindung (diese wird vom Master aktiviert).' /Francais '' /Italiano '' ] [A ] 3 ] ] [R @363 [A 3277108 3277108 3 'Timed Out' 85 '' 4097 '' [A ] 0 [D /English 'Connection state of the Polled IO data Exchange.' /Deutsch 'Verbindingszustand der Polled IO Verbindung (diese wird vom Master aktiviert).' /Francais '' /Italiano '' ] [A ] 4 ] ] [R @363 [A 3277109 3277109 3 'Deferred Delete' 85 '' 4097 '' [A ] 0 [D /English 'Connection state of the Polled IO data Exchange.' /Deutsch 'Verbindingszustand der Polled IO Verbindung (diese wird vom Master aktiviert).' /Francais '' /Italiano '' ] [A ] 5 ] ] [R @295 [A 8503 26713 2 'Consumed Connection Size' 85 '' 4099 '' [A ] 0 [D /English 'Polled IO consumed connection size.' /Deutsch 'Groesse der Daten in Bytes welche vom Master gesendet werden' /Francais '' /Italiano '' ] 0 'DEC' 0 65535 0 ] ] [R @295 [A 8504 26712 2 'Produced Connection Size' 85 '' 4099 '' [A ] 0 [D /English 'Polled IO produced connection size.' /Deutsch 'Groesse der Daten in Bytes welche vom Slave geantwortet werden' /Francais '' /Italiano '' ] 0 'DEC' 0 65535 0 ] ] [R @295 [A 8505 26722 2 'Polled IO Cycle Time TimeOut' 85 '' 4099 '' [A ] 0 [D /English 'polled IO cycle timeout time.' /Deutsch 'Timeout-zeit der Polled IO Verbindung.' /Francais '' /Italiano '' ] 4 'SCALED' 0 65535 0 ] ] [R @295 [A 8506 26725 2 'Polled IO Cycle Time' 85 '' 4099 '' [A ] 0 [D /English 'Actual value of Polled IO cycle Time.' /Deutsch 'Aktueller Wert der Polled IO Zykluszeit.' /Francais '' /Italiano '' ] 4 'SCALED' 0 65535 0 ] ] [R [D:SInt32 /UPID @0 /DEVICE_UPID @0 /Level @0 /Caption @0 /Permission @0 /AdditionalFunction @0 /AddrUsage @0 /UseVFlag @0 /WizardUPIDList @0 /HelpIndex @0 /HelpTextDict @0 /UUID @0 /DisplayMode @0 /MinValue @0 /MaxValue @0 /DefValue @0 ] [A 8507 62492 2 'Monitoring Channel 1 Value' 85 'UPIDSCALE:$20A8' 4099 '' [A ] 0 [D /English 'Value of monitoring channel 1.' /Deutsch 'Wert der gesendeten Daten im Monitor Kanal 1' /Francais '' /Italiano '' ] 0 'SCALED' 2147483648 2147483647 0 ] ] [R @444 [A 8508 62493 2 'Monitoring Channel 2 Value' 85 'UPIDSCALE:$20A9' 4099 '' [A ] 0 [D /English 'Value of monitoring channel 2.' /Deutsch 'Wert der gesendeten Daten im Monitor Kanal 2' /Francais '' /Italiano '' ] 0 'SCALED' 2147483648 2147483647 0 ] ] [R @444 [A 8509 62494 2 'Monitoring Channel 3 Value' 85 'UPIDSCALE:$20AA' 4099 '' [A ] 0 [D /English 'Value of monitoring channel 3.' /Deutsch 'Wert der gesendeten Daten im Monitor Kanal 3' /Francais '' /Italiano '' ] 0 'SCALED' 2147483648 2147483647 0 ] ] [R @295 [A 8512 26636 2 'Parameter UPID' 85 '' 4097 '' [A ] 0 [D /English 'UPID of last accessed parameter via explicit message.' /Deutsch 'Parameter UPID des letzten angesprochenen Parameters via expizite Messageing.' /Francais '' /Italiano '' ] 0 'HEX' 0 65535 0 ] ] [R @444 [A 8513 62469 2 'Parameter Value' 85 '' 4099 '' [A ] 0 [D /English 'Value of last accessed parameter via explicit message.' /Deutsch 'Parameter Wert des letzten angesprochenen Parameters via expizite Messageing.' /Francais '' /Italiano '' ] 0 'HEX' 2147483648 2147483647 0 ] ] ] /VisibilityFlags [A [R [D:ViewFlagCont /Name @0 /Type @0 /Equation @0 ] [A 'DN_Main' 'BASE' @0 ] ] [R @466 [A 'DN_Wizard' 'CALC' [A 'DN_Main' 'DN_Main' '!' '#' ] ] ] [R @466 [A 'DN_on' 'BASE' @0 ] ] [R @466 [A 'DN_BR_Para' 'BASE' @0 ] ] [R @466 [A 'DN_BR_BTR' 'BASE' @0 ] ] [R @466 [A 'DN_MACID_Para' 'BASE' @0 ] ] ] /MessageSources [A [D /Caption 'DeviceNet SW Error' /Name 'INTF_ERROR_GROUP_1' /SourceID 4099 /Type 'SOURCE' /MsgArr [A [D /MSGType 13 /EnumChildArray [A [R [D:ChildTypeListCont /Caption @0 /Classification @0 /Value @0 /HelpIndex @0 /HelpTextDict @0 /Fatal @0 /ErrorBehavior @0 ] [A 'Err: UPID doesn@'t exist' 'Error' 200 0 [D /English 'UPID defined for reading or writing parameter or variable does not exist.' /Deutsch 'UPID definiert fuer das lesen oder schreiben eines Parameters oder Variable existiert nicht.' /Francais '' /Italiano '' ] #0 @0 ] ] [R @485 [A 'Err: Parameter wrong  type' 'Error' 201 0 [D /English 'Parameter has wrong type' /Deutsch 'Paramter hat falscher Typ.' /Francais '' /Italiano '' ] #0 @0 ] ] [R @485 [A 'Err: MACID already owned' 'Error' 208 0 [D /English 'MACID already exists in DeviceNet network, use other MACID' /Deutsch 'Die eingestellte DevicNet MACID existiert schon im Netz\ stelle andere MACID ein.' /Francais '' /Italiano '' ] #1 @0 ] ] [R @485 [A 'Err: Polled IO Time Out' 'Error' 209 0 [D /English 'Polled data exchange had timeout.' /Deutsch 'Polled Io Datenaustausch ist in Timeout geraten.' /Francais '' /Italiano '' ] #0 @0 ] ] [R @485 [A 'Cfg Err: Invalid MACID' 'Error' 210 0 [D /English 'The defined MACID with switches is not in the valid DeviceNet range of 00..63.' /Deutsch 'Die mittels Switches generierte MACID liegt ausserhalb des in DeviceNet definierten bereichs von 0..63.' /Francais '' /Italiano '' ] #1 @0 ] ] ] ] ] ] ] ]